Radium Engineering

Universal single catch can kit with hoses and fittings for 6AN (3/8 inch ID) hose. Comes with a universal mounting bracket, a variety of adpater fi...

8AN PTFE hose and hose-end fittings. 14.7 feet of hose (4.5m). Two straight hose ends, two 90 degree hose ends and two 45 degree hose ends. This P...

CNC machined aluminum with anodized finish. O-ring sealed. Swivels after installation.

This kit includes a specially designed bracket and fittings to use the Radium DMR regulator off of the fuel rail. Only compatible with Radium's G...

Radium Engineering 0-100 PSI Fuel Pressure Gauge w/ 8AN Adapter

Radium Engineering Porsche 17in Fuel Pump Connector Harness - Walbro E85

Newly redesigned in-tank fuel hanger for the Mitsubishi Evolution X. Can be used with single or dual pump. Pre-installed fittings compatible with f...

Female dry break receptacle for mounting on exterior body work of vehicle. Back side features a 2.25" hose barb connection. Only compatible with Ra...

Single catch can kit for the 2014-2019 Chevrolet Corvette (C7). Interfaces with the PCV line. Includes all parts for easy bolt-in installation. Inc...

Kit to add a second pump to the Radium in-tank fuel hanger for Honda applications. Compatible with Radium kit number 20-0790-00.

Radium Engineering 1.5in Dry Break Fuel Filler, Male, PRV

Fuel hanger plumbing kit for Radium in-tank fuel pump hanger for the BMW E36 and E46.This Part Fits: Year Make Model Submodel 1991-1998 BMW 318i...

Fitting with 10mm diameter femal SAE quick connect on one side and 3/8 inch hose barb on the other. Constructed of plastic and compatible with all ...

Fuel hanger plumbing kit for Radium in-tank fuel pump hanger for the BMW E36 and E46.This Part Fits: Year Make Model Submodel 1991-1998 BMW 318i...

Installation instructions available at www.radiumauto.com

Drop-in fuel pump hanger for the 2011+ Ford Mustang. Regulator integrated in top hat, but can be bypassed with kit 20-0806. Pumps not included and...

Allows connection of the Radium fuel rail to the factory fuel line system in the E46 BMW engine bay. Includes plugs and fittings for the fuel rail....

Radium Engineering Nissan Skyline G37 Q50 Q60 Early Model Fuel Level Adapter

Dual catch can kit for 2015-2019 Corvette Z06. See radiumauto.com for more details.This Part Fits: Year Make Model Submodel 2017-2019 Chevrolet ...

Drop-in fuel pump hanger for the FK8 Type-R and other compatible vehicles. Can be used with up to 3 aftermarket fuel pumps. To be used with OEM fu...

5 gallon fuel dump can featuring dry-break probe compatible with Radium dry-break fuel filler receptacles.

Universal adjustable fuel pressure regulator for EFI vehicles. Ideal for pump flows from 200 lph to 1400 lph. E85 compatible. Green anodized top. T...

Radium Engineering Lotus Exige (All) Rear Clamshell Shim KitThis Part Fits: Year Make Model Submodel 2006 Lotus Exige Base 2007-2009 Lotus Exi...

Single catch can kit for the 2005-2023 Toyota Tacoma. Interfaces with the PCV valve line and helps keep oil and contaminants out of the induction s...

Radium Engineering 45 Degree 12AN Pushlok Hose End Fitting

A high flow fuel pressure regulator with a built-in fuel pulse damper. Regulator is ideal for pumps that flow from 100 to 1,400 liters per hour. Un...

10AN PTFE hose and hose-end fittings. 14.7 feet of hose (4.5m). Two straight hose ends, two 90 degree hose ends and two 45 degree hose ends. This ...

CNC machined and anodized. Uses OEM mounting studs and hardware. No drilling required.

Radium Engineering 10AN Hose End 45 Degree PTFE - BLACK

Radium Engineering 10AN Hose End Straight PTFE - BLACK

One way check valve adpater fitting. Screws into a female 6AN ORB port and has a male 10mm hose barb.

One way check valve adpater fitting. Screws into a female 6AN ORB port and has a male 8.5mm hose barb.

Fuel surge tank compatible with Walbro F90000-series fuel pumps. Can hold up to three pumps. Fuel pumps sold separately and must be installed by th...

Allows the use of certain brushless fuel pumps with Radium products. See website for additional details.

Radium Engineering 1/2in SAE Male to 6AN Male

Mounting bracket for Radium Engineering fuel filters. Designed specifically for the FR-S/BRZ/GT86/GR86 (all years). Locates filter under the car n...

CNC machined aluminum extension for Radium Fuel Cell Surge Tanks. Ideal for adding more capacity to the fuel surge tank. Must be used with deep fue...

Comprehensive fuel plumbing kit for use with the Radium in-tank fuel pump hanger for the Cadillac CTS-V. Includes all PTFE fuel lines, fuel filter ...

This low profile swiveling fitting screws into a 6AN ORB port where an 8.5mm hose can attach to the fitting. Has swivel 6AN male. Safe for use wit...

CNC machined fuel rail for the Toyota 3UZ-FE/1UZ-FE VVT-I engines. Each fuel rail is equipped with three 8AN ORB ports, which can be used for plumb...

Radium Nissan S14/S15/R33/R34 Fuel Hanger For GSS342 Or AEM 50-1200 - Pumps Not IncludedThis Part Fits: Year Make Model Submodel 1995-1998 Nissa...

Press in fitting that swivels after installation. 10AN male. Made for 17.5mm hole.

Compatible with all models of Radium Fuel Cell Surge Tanks. Elevates the vent valve to allow more filling before DSV float ball shuts off the air v...

Adapter fitting clips on to the valve cover vent fitting on the BMW B58 engine and converts to a 10AN male.

This optional kit compliments the Radium MZR fuel rail by allowing the stock fuel connection to be used.

CNC machined fuel rail for the 4-cylinder Mazda MZR engine. This fuel rail is equipped with four 8AN ORB ports, which can be used for plumbing and ...

Radium Engineering Competition Catch Can Extension Upgrade

Radium Engineering BMW E46 M3 (S54) Fuel Rail Kit (Does Not Include Hose or Fittings)This Part Fits: Year Make Model Submodel 2001-2006 BMW M3 B...