Des questions? 1-833-652-5742
Des questions?
1-833-652-5742
Adapter fitting. 8AN ORB male to swiveling 10AN male flare. Stainless steel and aluminum construction.
CNC machined aluminum with anodized finish. O-ring sealed. Swivels after installation.
Stainless steel and aluminum construction. Screws into a 8AN ORB port and provides a swiveling 6AN female.
360 degree swiveling fitting. Stainless steel and anodized aluminum construction. Suitable for all fluids. Rated for use up to 150 psi.
This low profile swiveling fitting screws into a 6AN ORB port and has a hose barb at 90 degree angle. Safe for use with all types of fluid. Constru...
Afficher tous les détailsStainless steel and aluminum construction. Screws into a 6AN ORB female port and provides a hose barb connection that swivels 360 degrees. Suitable...
Afficher tous les détailsThis fitting screws into any female 6AN ORB port and provides a 360 degree swiveling 3/8 SAE quick connect male. This low profile fitting is safe ...
Afficher tous les détailsThis 90 degree swivel fitting screws into a 6AN ORB female port and has a male 5/16 SAE quick connect fitting. Compatible with all fuels and oils.
360 degree swiveling fitting. Screws into a 6AN ORB port and features a 10mm hose barb.
Radium Engineering 6AN ORB Swivel Banjo to 8AN Male
Swiveling fitting that will screw into a 6AN ORB port and provides a 6AN ORB female to use. Stainless steel and aluminum construction.
This low profile swiveling fitting screws into a 6AN ORB port and has a 6AN male at 90 degree angle. Safe for use with all types of fluid. Construc...
Afficher tous les détailsSwiveling fitting. Stainless steel and aluminum construction. Suitable for most fluids.
Swiveling fitting. Stainless steel and aluminum construction. Suitable for most fluids.
Stainless steel and aluminum construction. Swivels 360 degrees after installation. Compatible with most fluids.
Triple catch can kit for the 2014-2019 Chevrolet Corvette (C7). Interfaces with the PCV line and CCV vents. Includes all parts for easy bolt-in ins...
Afficher tous les détailsThis fuel rail plumbing kit is designed to be used with Radium Engineering fuel rails on Subaru EJ engines. It plumbs the fuel rails in a parallel ...
Afficher tous les détailsPlumbing kit for hooking up the Radium in-tank fuel hanger to the engine for the 2003-2008 Chevrolet Corvette. Includes lines, fittings, fuel filte...
Afficher tous les détailsIn-tank fuel pump hanger for the 2003-2013. Compatible single aftermarket fuel pump (sold separately). Compatible with E85.
This fuel plumbing kit compliments a Radium fuel rail installation on Subaru EJ engines. It plumbs the fuel rails in series and uses Radium's uniqu...
Afficher tous les détailsKit includes fuel lines, fittings, fuel filter and a high performance adjustable fuel pressure regulator. All necessary hardward is also included f...
Afficher tous les détailsKit includes fuel lines, fittings, fuel filter and a high performance adjustable fuel pressure regulator. All necessary hardward is also included f...
Afficher tous les détailsRadium Engineering 08-21 Subaru WRX STi (EJ257 Only) RA-Series Fuel Pressure Regulator KitThis Part Fits: Year Make Model Submodel 2015-2021 Sub...
Afficher tous les détailsUniversal fuel surge tank. Compatible with a single pump only. Refer to website for a list of compatible fuel pump models. Fuel pump sold separate...
Afficher tous les détailsCNC machined and anodized for an attractive finish and resistance to E85 fuels. This fuel rail features a total of three 8AN ORB ports and one 1/8N...
Afficher tous les détailsFittings, hoses, adjstable regulator and all necessary hardware to connec Radium VR38DETT fuel rails to the factory fuel feed and return lines on t...
Afficher tous les détailsIn-tank fuel hanger surge tank for the Mazda RX-7 (FD generation). Can be set up with multiple pumps. Designed to eliminate any chance of fuel pum...
Afficher tous les détailsIn-tank fuel hanger surge tank for the Mazda RX-7 (FD generation). Can be set up with multiple pumps. Designed to eliminate any chance of fuel pum...
Afficher tous les détailsHigh flow feed kit from fuel tank to engine bay using PTFE hoses and Radium in-line fuel filter. Hoses pre-made to length and special filter mounti...
Afficher tous les détailsHigh flow feed kit from fuel tank to engine bay using PTFE hoses and Radium in-line fuel filter. Hoses pre-made to length and special filter mounti...
Afficher tous les détailsIn-tank fuel pump hanger for the Toyota JZX chassis vehicles. Replaces the factory fuel pump assembly. Can be used with one or two aftermarket fuel...
Afficher tous les détailsKit for adding a second fuel pump to the Radium fuel pump hanger for the Corvette. Must already have Radium in-tank fuel pump hanger system.
Fuel cell vent valve will roll-over protection. 12AN Male hose connection.
Fuel cell vent valve with roll-over protection. Screws into a 12AN ORB female port.
Replaces the fuel filter/regualtor on the bottom of the E46 BMW. Uses Radium's high-flow fuel filter and adjustable fuel pressure regulator. All fi...
Afficher tous les détailsReplaces the fuel filter/regualtor on the bottom of the E46 BMW. Uses Radium's high-flow fuel filter and adjustable fuel pressure regulator. All fi...
Afficher tous les détailsMounting bracket kit for circular spare tire well fuel cells. See website for compatibility notes.
Stainless steel mounting cage for Radium Engineering 22 gallon fuel cells.
Provides a mounting cage for Radium RA-series fuel cells. Stainless steel construction. Bolt-together design. Polished finish.
Dual catch can kit for the 2022+ Subaru BRZ and Toyota GR86. PCV and crankcase kits included. Easy bolt-in installation.This Part Fits: Year Make ...
Afficher tous les détailsSingle catch can kit for the 2022+ Subaru BRZ and Toyota GR86. Interfaces with the PCV valve line and installs the catch can in the RH corner of th...
Afficher tous les détailsStainless steel mounting cage for Radium RA-series 10gal fuel cells. Multi-piece design. 100% stainless steel construction.
Press-in valve cover breather fitting. Features a 10AN male 360 degree swiveling fitting. Compatible with all K-series valve covers that have the p...
Afficher tous les détailsProvides a mounting cage for Radium RA-series fuel cells. Stainless steel construction. Bolt-together design. Polished finish.
Dual catch can kit for the Toyta 86/Scion FR-S/Subaru BRZ, 2012-2020. Interfaces with the crankcase vent hose and PCV valve hose to filter out oil ...
Afficher tous les détailsSingle catch can kit for the Toyta 86/Scion FR-S/Subaru BRZ, 2012-2020. Interfaces with the crankcase vent hose to filter out oil and other contami...
Afficher tous les détailsSingle catch can kit for the Toyta 86/Scion FR-S/Subaru BRZ, 2012-2020. Interfaces with the PCV valve hose to filter out oil and other contaminants...
Afficher tous les détailsFuel rail plumbing kit allows easy hook of the Radium fuel rail to the facotry fuel lines. All necessary fittings included.