Radium Engineering

PTFE submersible fuel tubing. 3/8" inside diameter, 8.2" overall length.

Kit to install an aftermarket fuel pump into the BMW E46 (non-M3). No pump included. User must supply their own pump.

Collection of fittings to be used with 20-0889 fuel rail to allow connection of factory fuel feed line.

Billet aluminum fuel rail for VW / Audi EA888 engine. Accomodates OEM fuel sensor. Includes 8AN ORB fuel ports. To be used with port injection OEM ...

Single catch can kit compatible with Golf GTi and Golf R. Interfaces with crankcase vent line. Features Radium's patented fluid-lock catch can.

This item allows the installation of an aftermarket fuel pump into the stock BMW fuel pump hanger. Pump not included.

CNC anodized aluminum construction. Large 8AN ORB ports. Bolt-on installation. Mounting hardware included.This Part Fits: Year Make Model Submodel...

Radium Engineering 91-03 Volkswagen Golf GTI 2.8L 12V VR6 Fuel Rail

PTFE submersible fuel tubing. 5/16" inside diameter, 8.2" overall length.

Radium Engineering Catch Can Kit BMW E46 3-Series Fluid Lock

CNC machined aluminum fuel rail for the VW 1.8T 20-valve engine. Features 8AN ports. See product page at www.radiumauto.com for more information.Th...

Plumbing kit to be used with the Radium ENgineering fuel rail for the Toyota 2JZ-GE engine. Retains factory returness system.

Bolt-on fuel rail for the Honda F and H series FWD engines. Compatible with stock or aftermarket fuel injectors. 8AN ORB ports. Available in black...

Fuel rail plumbing kit for 20-0866. Includes all necessary hoses and fittings.

Fuel rail set for the Huracan and R8 port injections system. Direct bolt-in installation with no modifications required to vehicle or engine. Plumb...

In-tank fuel surge tank. Provides extra fuel pump for port injection on the 5.2 V10 Audi engines.

Dual catch can kit for the Lamborghini Gallardo. Includes Radium's Fluid Lock catch cans (patent pending).

Anodized aluminum. For use with OEM hose connection. Converts to 10AN male.

This kit includes hoses, fittings, fuel filter and other parts to provide high-flow feed lines from the Radium in-tank hanger up to the engine bay ...

This kit is needed when using Radium in-tank fuel pump hangers on any 2015-2021 Subaru WRX with the FA20 engine.

CNC machined fuel rail for the 4-cylinder Toyota 3S-GTE engines. This fuel rail is equipped with four 8AN ORB ports, which can be used for plumbing...

Stainless steel construction. Compatible with all fuel types. 5-bolt SAE standard pattern. 0-ohm empty, 90-ohm full.

Stainless steel fuel level sender for Radium fuel cells. 8" long. Suitable for Radium 6 gallon, 10 gallon and spare tire fuel cells.

Refueling kit for Radium Engineering FCST-X equipped fuel cells. Featuring remote mounted filler with screw off cap, 1.5" x 3ft fill hose, angled f...

Refueling kit for Radium Engineering FCST-X equipped fuel cells. Featuring a direct mounted fill neck with screw off cap and 8AN vent line.

Complete refueling kit for Radium Engineering FCST-X equipped fuel cells. Includes a remote mounted filler with screw-off cap, 1.5" x 3ft fill hose...

Dual catch can kit for the 2005-2023 Toyota Tacoma. Oil catch cans interface with both the crankcase vent line and PCV line. Catch cans collect oil...

Aluminum fuel pump access cover for the 2008-2015 Cadillac CTS(all). Requires drilling/cutting for installation. See website for more details.

Coolant tank for the 2017+ Honda Civic Type-R (FK8 and FL5). Replaced OEM plastic tank. Easy bolt-in installation.This Part Fits: Year Make Model...

Dual catch can kit for the 2017+ Honda Civic Type-R (FK8 and FL5). Includes catch cans for PCV line and for crankcase vent line. Features Radium's ...

Single catch can kit for the 2017+ Honda Civic Type-R (FK8 & FL5). Features Radium's patented Fluid Lock catch can. For crankcase breather hose...

This air/oil separator is designed to collect crankcase gasses and allow collected oil to drain back into the engine via gravity. Gasses are then ...

Single clamp with two positions. Anodized aluminum.

This fitting presses into the Nissan RB25DET valve cover and will work on either intake or exhause side. Presents a swiveling 10AN male fitting fo...

Press-in valve cover fitting for the Nissan S14/S15 SR20DET. Exhaust side. 10AN male connection.

Press in valve cover fittings for the Nissan S13 SR20DET (red and black top). Exhaust side. Double sided 10AN male connections.

Press-in fitting breather fitting for the Nissan KA24DE valve cover. 10AN male swivels 360 degrees. Stainless steel and aluminum construction.

Press-in swivel fitting with 12AN male. For use on the Nissan RB26DETT engine valve covers.

This stainless steel and aluminum fitting presses into the S14/S15 Nissan SR20DET valve cover on the intake side and replaces the PCV valve with a ...

This kit allows decomissioning of Radium built-in pressure regulators in certain Radium fuel pump hangers. This allows the user to convert to a ret...

Attaches to specific fuel pump outlet barbs. Integrated check valve. 10mm Hose barb male connection. See www.radiumauto.com for more information.

Kit to add second pump to Radium Engineering in-tank fuel pump hanger for Honda Acura vehicles. Compatible with Radium kit part number 20-0792-00.

Submersible PTFE tubing for use with submerged fuel pumps. 3/8" ID.

Radium Engineering 94-01 Acura Integra/ 92-00 Honda Civic Fuel Hanger For Walbro F90000267/274/285This Part Fits: Year Make Model Submodel 1997-...

In-tank fuel pump hanger for the Civic and Integra. For use with Walbro GSS342 or AEM 50-1000/1200 pumps (or similar).This Part Fits: Year Make Mo...

Dual catch can kit for the 2005-2013 Chevrolet Corvette. Interfaces with crankcase vent hose and PCV line to intercept oil and other contaminants a...

Single catch can kit for the 2005-2013 Chevrolet Corvette. Interfaces with crankcase vent hose to intercept oil and other contaminants a keep them ...

Single catch can kit for GM LS2, LS3, LS7 engines. Mounts to engine, so this kit can be used with any vehicle featuring one of the compatible engin...