Radium Engineering

Radium Engineering 1/2in SAE Male to 6AN Male

Mounting bracket for Radium Engineering fuel filters. Designed specifically for the FR-S/BRZ/GT86/GR86 (all years). Locates filter under the car n...

CNC machined aluminum extension for Radium Fuel Cell Surge Tanks. Ideal for adding more capacity to the fuel surge tank. Must be used with deep fue...

Comprehensive fuel plumbing kit for use with the Radium in-tank fuel pump hanger for the Cadillac CTS-V. Includes all PTFE fuel lines, fuel filter ...

This low profile swiveling fitting screws into a 6AN ORB port where an 8.5mm hose can attach to the fitting. Has swivel 6AN male. Safe for use wit...

CNC machined fuel rail for the Toyota 3UZ-FE/1UZ-FE VVT-I engines. Each fuel rail is equipped with three 8AN ORB ports, which can be used for plumb...

Radium Nissan S14/S15/R33/R34 Fuel Hanger For GSS342 Or AEM 50-1200 - Pumps Not IncludedThis Part Fits: Year Make Model Submodel 1995-1998 Nissa...

Press in fitting that swivels after installation. 10AN male. Made for 17.5mm hole.

Compatible with Radium products that use the 20-0461 level switch. Provides a visual indication that level switch has activated. Picture shows exac...

Compatible with all models of Radium Fuel Cell Surge Tanks. Elevates the vent valve to allow more filling before DSV float ball shuts off the air v...

Adapter fitting clips on to the valve cover vent fitting on the BMW B58 engine and converts to a 10AN male.

This optional kit compliments the Radium MZR fuel rail by allowing the stock fuel connection to be used.

CNC machined fuel rail for the 4-cylinder Mazda MZR engine. This fuel rail is equipped with four 8AN ORB ports, which can be used for plumbing and ...

Radium Engineering Competition Catch Can Extension Upgrade

Radium Engineering BMW E46 M3 (S54) Fuel Rail Kit (Does Not Include Hose or Fittings)This Part Fits: Year Make Model Submodel 2001-2006 BMW M3 B...

Swiveling low profile fitting. Screws into a 10AN ORB female port and has a 10mm hose barb swivel.

CNC machined fuel rail for the Honda S2000. 8AN ORB ports. Compatible with OEM fuel injectors, or any aftermarket injectors that are same fitment. ...

CNC machined aluminum fuel rail for the S13 SR20DET. Features 8AN ports. This fuel rail converts to top feed injectors. See product page at www.rad...

Permits a bolt-on plug and play replacement for the OEM system when using the Radium Engineering fuel rail for the MX-5/Miata. OEM fuel pressure re...

Catch can O-ring service kit for Radium engineering standard 8oz catch cans.

In-tank fuel pump hanger for Honda models. Compatible with Walbro F90000-series pumps or other pumps with similar form factor and wiring connection...

In-tank fuel pump hanger for Honda models. Compatible with Walbro F90000-series pumps or other pumps with similar form factor and wiring connection...

Drop-in surge tank system for competition fuel cells. Designed for use with external or mechanical fuel pumps. Easily serviceable with new lift-out...

Drop-in surge tank system for competition fuel cells. Designed TI Automotive E5LM brushless fuel pumps (sold separately). Easily serviceable with ...

Drop-in surge tank system for competition fuel cells. Designed for Walbro F90000-series pumps. One lift pump and three primary pumps included. Eas...

Drop-in surge tank system for competition fuel cells. Designed for Walbro F90000-series pumps. One lift pump and two primary pumps included. Easil...

Drop-in surge tank system for competition fuel cells. Designed for Walbro F90000-series pumps. One lift pump and one primary pump included. Easily...

Drop-in surge tank system for competition fuel cells. Designed for Walbro F90000-series pumps (no pumps included). Easily serviceable with new lif...

Drop-in surge tank system for competition fuel cells. Designed for Bosch BR540 style pumps (pumps sold separately). Easily serviceable with new li...

Drop-in surge tank system for competition fuel cells. Single lift pump and three primary pumps included. Easily serviceable with new lift-out fuel...

Drop-in surge tank system for competition fuel cells. Single lift pump and two primary pumps included. Easily serviceable with new lift-out fuel p...

Drop-in surge tank system for competition fuel cells. Single lift pump and primary pump included. Easily serviceable with new lift-out fuel pump m...

Drop-in surge tank system for competition fuel cells. Can be used with up to three fuel pumps. Easily serviceable with new lift-out fuel pump modu...

Drop-in billet fuel pump hanger for BMW E9x models and similar. Can hold up to two aftermarket fuel pumps. Collector box and built-in pressure regu...

Updated design for 2023. Fuel surge tank with integrated fuel pressure regulator. Utilizes an internal fuel pump (sold separately). Separate fuel p...

Drop-in fuel pump hanger with built-in anti-starvation surge tank. Set up to use Ti Automotive "450" style pumps or DW440 pumps.

Drop-in fuel pump hanger with built-in anti-starvation surge tank. Set up to use Walbro "255" style pumps.

Drop-in fuel pump hanger with built-in anti-starvation surge tank. Set up to use Ti Automotive "450" style pumps.

Drop-in fuel pump hanger with built-in anti-starvation surge tank. Set up to use Walbro "255" style pumps.

Universal single catch can kit with hoses and fittings for 10AN (5/8 inch ID) hose. Comes with a universal mounting bracket, a variety of adpater f...

Universal single catch can kit with hoses and fittings for 8AN (1/2 inch ID) hose. Comes with a universal mounting bracket, a variety of adpater fi...

Universal single catch can kit with hoses and fittings for 6AN (3/8 inch ID) hose. Comes with a universal mounting bracket, a variety of adpater fi...

In-tank fuel pump hanger for the 2011+ Ford Mustang (all). Compatible with certain aftermarket fuel pumps. Integrated fuel pressure regulator. Can ...

In-tank fuel pump hanger for Honda models. Compatible with Walbro F90000-series pumps or other pumps with similar form factor and wiring connection...

In-tank fuel pump hanger for Honda models. Compatible with Walbro GSS342 or other pumps with similar form factor and wiring connections.This Part F...

Newly redesigned in-tank fuel hanger for the Mitsubishi Evolution X. Can be used with single or dual pump. Compatible with Walbro F90000-series fue...

Radium's redesigned direct mount EFI fuel pressure regulator is new for 2020 and has many new improvements. The regulator mounts with a new swiveli...

Radium's redesigned direct mount EFI fuel pressure regulator is new for 2020 and has many new improvements. The regulator mounts with a new swiveli...