Radium Engineering

This kit is needed when using Radium in-tank fuel pump hangers on any 2015-2021 Subaru WRX with the FA20 engine.

CNC machined fuel rail for the 4-cylinder Toyota 3S-GTE engines. This fuel rail is equipped with four 8AN ORB ports, which can be used for plumbing...

Stainless steel construction. Compatible with all fuel types. 5-bolt SAE standard pattern. 0-ohm empty, 90-ohm full.

Stainless steel fuel level sender for Radium fuel cells. 8" long. Suitable for Radium 6 gallon, 10 gallon and spare tire fuel cells.

Refueling kit for Radium Engineering FCST-X equipped fuel cells. Featuring remote mounted filler with screw off cap, 1.5" x 3ft fill hose, angled f...

Refueling kit for Radium Engineering FCST-X equipped fuel cells. Featuring a direct mounted fill neck with screw off cap and 8AN vent line.

Complete refueling kit for Radium Engineering FCST-X equipped fuel cells. Includes a remote mounted filler with screw-off cap, 1.5" x 3ft fill hose...

Dual catch can kit for the 2005-2023 Toyota Tacoma. Oil catch cans interface with both the crankcase vent line and PCV line. Catch cans collect oil...

Aluminum fuel pump access cover for the 2008-2015 Cadillac CTS(all). Requires drilling/cutting for installation. See website for more details.

Coolant tank for the 2017+ Honda Civic Type-R (FK8 and FL5). Replaced OEM plastic tank. Easy bolt-in installation.This Part Fits: Year Make Model...

Dual catch can kit for the 2017+ Honda Civic Type-R (FK8 and FL5). Includes catch cans for PCV line and for crankcase vent line. Features Radium's ...

Single catch can kit for the 2017+ Honda Civic Type-R (FK8 & FL5). Features Radium's patented Fluid Lock catch can. For crankcase breather hose...

This air/oil separator is designed to collect crankcase gasses and allow collected oil to drain back into the engine via gravity. Gasses are then ...

Single clamp with two positions. Anodized aluminum.

This fitting presses into the Nissan RB25DET valve cover and will work on either intake or exhause side. Presents a swiveling 10AN male fitting fo...

Press-in valve cover fitting for the Nissan S14/S15 SR20DET. Exhaust side. 10AN male connection.

Press in valve cover fittings for the Nissan S13 SR20DET (red and black top). Exhaust side. Double sided 10AN male connections.

Press-in fitting breather fitting for the Nissan KA24DE valve cover. 10AN male swivels 360 degrees. Stainless steel and aluminum construction.

Press-in swivel fitting with 12AN male. For use on the Nissan RB26DETT engine valve covers.

This stainless steel and aluminum fitting presses into the S14/S15 Nissan SR20DET valve cover on the intake side and replaces the PCV valve with a ...

This kit allows decomissioning of Radium built-in pressure regulators in certain Radium fuel pump hangers. This allows the user to convert to a ret...

Attaches to specific fuel pump outlet barbs. Integrated check valve. 10mm Hose barb male connection. See www.radiumauto.com for more information.

Kit to add second pump to Radium Engineering in-tank fuel pump hanger for Honda Acura vehicles. Compatible with Radium kit part number 20-0792-00.

Submersible PTFE tubing for use with submerged fuel pumps. 3/8" ID.

Radium Engineering 94-01 Acura Integra/ 92-00 Honda Civic Fuel Hanger For Walbro F90000267/274/285This Part Fits: Year Make Model Submodel 1997-...

In-tank fuel pump hanger for the Civic and Integra. For use with Walbro GSS342 or AEM 50-1000/1200 pumps (or similar).This Part Fits: Year Make Mo...

Dual catch can kit for the 2005-2013 Chevrolet Corvette. Interfaces with crankcase vent hose and PCV line to intercept oil and other contaminants a...

Single catch can kit for the 2005-2013 Chevrolet Corvette. Interfaces with crankcase vent hose to intercept oil and other contaminants a keep them ...

Single catch can kit for GM LS2, LS3, LS7 engines. Mounts to engine, so this kit can be used with any vehicle featuring one of the compatible engin...

This drop-in fuel hanger replaces the factory in-tank unit and allows one or two aftermarket fuel pumps to be used. Single outlet. Works with facto...

This drop-in fuel hanger replaces the factory in-tank unit and allows one or two aftermarket fuel pumps to be used. Single outlet. Works with facto...

This drop-in fuel hanger replaces the factory in-tank unit and allows one or two aftermarket fuel pumps to be used. Single outlet. Works with facto...

Fuel pulse damper for EFI fuel systems. Screws into a female 8AN ORB port (such as on a fuel rail). Damper body swivels after installation. Compati...

Fuel pulse damper for EFI fuel systems. Screws into a female 8AN ORB port (such as on a fuel rail). Damper body swivels after installation. Compati...

Radium Engineering Submersible PTFE Fuel Tubing 5/16in x 17.7in Long

Radium Engineering Fuel Cell Subharness Kit for FCST-X (or FCST)

Bolt-in master cylinder brace for the 2023+ Toyota GR Corolla

Bolt-on fuel rail kit for the BMW M50/M52/M54/S50/S52 engines. One kit works on all engines listed. Three 8AN ORB ports. E85 compatible. Compatible...

Fittings for use with Radium fuel rail for the Mazda 1.6L engine that allow hookup of the factory fuel system and regualtor.This Part Fits: Year M...

Fuel rail for the 1.6 BP Mazda engine found in the Miata and other cars. Features 8AN ORB ports. No fittings included.This Part Fits: Year Make Mo...

High performance machined aluminum fuel rail for the Toyota 1JZ-GTE VVT-i engine. Ports are 8AN ORB size and the fuel rail is anodized for compatib...

Billet aluminum coolant tank for the 2023+ Toyota GR Corolla. Retains all factory functionality.

Select fittings and adpaters to be used with fuel rail 20-0766. Allows easy hookup to OEM fuel line and sensors.

Billet aluminum fuel rail for the 2023+ Toyota GR Corolla. Compatible with all factory sensors and fittings when using the associated plumbing kit....

CNC machined fuel rails for the Subaru 6-cylinder EZ30 (phase 2) and EZ36. Direct bolt-on fitment. Compatible with OEM or aftermarket fuel injector...

Brackets for holding aftermarket high-flow fuel lines to underside of the GR Supra. Uses all factory mounting locations.

High flow fuel lines to travel between the Radium fuel hanger and the port injection kit for the MK5 GR Supra. Includes fuel filter wtih stainless ...

Drop-in fuel pump hanger for the MK5 Supra. Allows addition of second pump for port injection system. More details at www.radiumauto.com